GM Racing 94004 Manuel D'utilisation page 30

ADJUSTMENT METHOD FOR VTR-CURVE
Select VTR at setup item "M", Select setup item "R" and make the following adjustments:
1. Forward side adjustment:
Use the (+) button to adjust the + side when you want to quicken the rise and use the (-)
button to adjust the side when you want to make the rise milder.
2. Curve switching point adjustment:
When you want to change the curve switching point relative to the throttle trigger,
select the setting item „P" by ENTER button, and use the (+) and (-) buttons to move to the
point you want to set.
3. When ending setting, return to the initial screen by pressing the EXIT.
ADJUSTMENT METHOD FOR CUR CURVE
Select CUR at setup item "M", select setup item "R" and make the following adjustments:
1. Curve setup:
Select the setting item „1:" (1st point), by ENTER button and use the (+) and (-) buttons to
set the 1st point.
Set the throttle curve by sequentially setting „2:" (2nd point)~ „3:" (3th point).
2. When ending setting, return to the initial screen by pressing the EXIT.
TERMS: M-MODE, R-RATE,BR-BRAKE, VTR-VERTICAL, CUR-CURVES, P-TRIGGER
POS, 1~3-Curves point 1~3.
29 94004 GM-Racing XG-6i 2.0 FHSS Race Spec