Steering Range (St.d/R); Sub-Trim (S_Trim); Servoreverse (Rev) - GM Racing 94004 Manuel D'utilisation

5.2. STEERING RANGE (ST.D/R)

D/R is used to change the action range of steering servo when turning the steering wheel.
Increasing D/R will make the steering wheel action more sensitive. --D/R adjusting value
range: 0~120%, POS0 default value is 100%,POS1 default value is 70%. -- Press the ST.D/R
dial to select POS0 or POS1, and the value will display in the LCD when it is on the main
screen.
1. Press "ENTER" to see FUNCTION MENU.
2. Press "+" or "-" to choose D/R, and press "ENTER" to enter D/R adjusting inter-
face.
3. Press "+" to increase and "-" to decrease D/R value.
4. Press "EXIT" to save your setting and leave D/R interface, and back to the function
menu interface.
TERMS: POS-POSITION

5.3. SUB-TRIM (S_TRIM)

Use this function to adjust the neutral position of the steering and throttle servos. SUB TRIM
adjusting value range: -100 - 100. Default is 0.
1. Press "ENTER" to see FUNCTION MENU.
2. Press "+" or "-" to choose TRIM, and press "ENTER" to
enter SUB TRIM adjusting interface.
3. Press "+" to increase and "-" to decrease SUB TRIM va-
lue.
4. Press "EXIT"to save your setting and leave SUB TRIM inter
face, and back to the function menu interface.
TERMS: ST-STEERING, TH-THROTTLE

5.4. SERVOREVERSE (REV)

This function reverses the direction of operation of the servos related to transmitter steering,
throttle, and channel 3 operation.
1. Press "ENTER" to see FUNCTION MENU.
2. Press "+" or "-" to choose REVERSE, and press "ENTER" to
enter REVERSE adjusting interface.
3. Press "ENTER" to choose each Channel.
4. Press "+" to increase and "-" to choose "REV" or "NOR".
5. Press "EXIT"to save your setting and leave REVERSE
interface, and back to the function menu interface.
Note: However, when the position set by trim or sub trim shifts from the center, the center
becomes the opposite side.
TERMS: ST-STEERING, TH-THROTTLE,AUX-AUXILLIARY
27 94004 GM-Racing XG-6i 2.0 FHSS Race Spec