Controlling The Suction Level; Vacuuming With Accessories - Bosch Relaxx'x BGS5 Serie Mode D'emploi

6*
Fig.
a) Place the accessories holder in the required positi-
on on the telescopic tube.
b) Use some pressure to insert the upholstery nozzle
with brush ring and the crevice nozzle into the ac-
cessories holder from above or below.
7
Fig.
Holding the power cord by the plug, pull out to the
required length and insert the plug into the mains
socket.
8
Fig.
To switch the vacuum cleaner on or off, press the
ON/OFF button.

Controlling the suction level

9
Fig.
The required suction level can be set to any level by
turning the control knob.
Low power range
= For vacuuming delicate materials, such as delicate >
upholstery, curtains, etc.
Medium power range
= For daily vacuuming of floors which are only slightly >
dirty.
High power range
= For vacuuming durable floor coverings, hard floors >
and heavy deposits of dirt.
Vacuuming
!
Caution
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have (e.g.
rough, rustic tiles). Therefore, you must check the
underside of the floor tool at regular intervals. Worn
undersides of floor tools may have sharp edges that
can damage sensitive hard floors, such as parquet or
linoleum. The manufacturer does not accept any re-
sponsibility for damage caused by worn floor tools.
10
Fig.
Set the adjustable floor nozzle:
Rugs and carpets =>
Hard floors/parquet =>
If you are vacuuming up larger particles, make sure that
you vacuum them up successively and carefully to en-
sure that the vacuum channels of the floor tool do not
become blocked.
If necessary, you should raise the nozzle in order to
better vacuum up the dirt particles.

Vacuuming with accessories

11
Fig.
Attach the nozzles to the suction pipe or hand grip as
required:
a) Crevice nozzle for vacuuming crevices and corners,
etc.
b) Upholstery nozzle for vacuuming upholstered furni-
ture, curtains, etc.
c) Upholstery nozzle with fixed brush ring for vacu-
uming window frames, cupboards, profiles, etc.
After use, reinsert the crevice nozzle and upholstery
nozzle into the accessories holder.
d) Professional crevice nozzle
Extra-long crevice nozzle for cleaning crevices,
corners and narrow spaces, e.g. in a car.
e) Professional upholstery nozzle
For gently and thoroughly cleaning upholstered
furniture, curtains, etc.
To clean the professional upholstery nozzle, simply
vacuum it using the handle.
f) Hard-floor tool for vacuuming hard floor coverings
(tiles, parquet flooring, etc.)
12*
Fig. Cleaning the hard-floor tool
a) Vacuum from below to clean the tool.
b) Use scissors to cut through threads and hairs
wound round the rollers, then vacuum them up.
13
Fig.
You can use the parking aid on the side of the vacuum
cleaner if you wish to stop vacuuming for a short time.
After switching off the appliance, slide the hook on
the floor tool into the parking aid.
14
Fig.
When vacuuming stairs, the appliance must be positi-
oned at the bottom of the stairs. If it does not reach
far enough, the appliance can also be carried using the
carrying handle.
When your work is finished
15
Fig.
Switch off the appliance.
Pull out the mains plug.
Briefly pull the power cord and release. (The power
cord retracts automatically).
16
Fig.
Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow and slide one
tube into the other.
17
Fig.
To store the appliance, use the storage aid on the
underside.
a) Stand the appliance up by the handle.
b) Slide the hook on the floor tool into the storage aid.
* Dependent on model
43