Publicité
Les langues disponibles
Les langues disponibles
-
Unscrew the 4 fitting screws of the handle block to dismantle it. Caution, side panels are clipped on the handle :
slightly lift the clips by pulling the handle.
Fitting screws of the handle block
Side clips on the handle block
3. Dismantling of the side panels and the taillight.
- Open the petrol tank flap and unscrew the fitting screws of this flap.
- Unclip the cover without dismantling it to have access to the 2 hidden side panels' screws. Unscrew these 2 hidden
Phillips screws on right and left sides, proceeding as shown on the pictures.
Left side
Right side
- Unscrew the 6 Phillips screws : 2 at the level of the petrol tank flap on the sides, and 4 on the bottom. Unscrew the
2 taillight's fitting screws too.
Taillight's fitting screws
Screws on the bottom on both sides
Screws on the bottom on both sides
- Unscrew the 4 fitting screws securing the stowage bin and 2 screws located behind the battery cover.
The 4 stowage
Screws behind the
bin's screws
battery cover
- Unscrew the taillight and indicators' terminals (on the right side under the cover).
Publicité
