Operating Controls - Sharp CS-2194H Mode D'emploi

OPERATING CONTROLS

POWER SWITCH; PRINT / ITEM
COUNT MODE SELECTOR:
"OFF": Power OFF.
"•":
"P":
"P•IC": Power ON. Set to the print
Notes: • Each time
Downloaded from:
Power ON. Set to the non-
print mode.
("• • • ... • • • –P" will be
printed.)
Power ON. Set to the print
mode.
("• • • ... • • • +P" will be
printed.)
and item count mode.
The counter will count the
number of times that
been pressed in addition.
is used in
subtraction, 1 will be
subtracted from the count.
• The count is printed when
the calculated result is
obtained.
• Pressing of ,
clears the counter.
http://www.usersmanualguide.com/
has
or
4
• T h e c o u n t e r
maximum capacity of 3
digits (up to ±999).
If the count exceeds the
maximum, the counter will
recount from zero.
DECIMAL SELECTOR:
Presets the number of decimal
places in the answer.
In the "F" position, the answer is
displayed in the floating decimal
system.
h a s a