ResMed VPAP Malibu Guide Utilisateur page 25

268106r1.book Page 20 Thursday, November 30, 2006 2:35 PM
Menus with a ResLink and Oximeter
If your clinician has recommended that you use a ResLink module, and the
ResLink and an oximeter are connected to the VPAP Malibu, then display of
SpO (oxygen saturation) and HR (heart rate) takes priority. If treatment has not
2
commenced, the VPAP Malibu will display one of the following screens, whether
a humidifier is connected or not:
Prior to starting treatment:
SpO2 : 98%
menu HR : 60
Max Ramp off
or
Max Settle off
Figure 3: Menu display with ResLink and oximeter
20
RAMP: 20min 98%
menu HR: 60
Max Ramp set
to non-zero value
SETTLE: 20min 98%
menu HR: 60
Max Settle set
to non-zero value