Intended Use; Non-Intended Use; Safety Instructions; Technical Data - Leister FUSION 1 Mode D'emploi

1.1 Intended use

The FUSION 1 is designed for professional welding of thermoplastic materials made from PE and PP in the fields
of
• container construction
• pipeline construction
• apparatus construction
• landfill and contaminated sites
• repairs
Use only original Leister spare parts and accessories; otherwise, any warranty or guarantee claims will be invali-
dated.
Welding processes and types of materials
• Welding thermoplastic materials (PE, PP)

1.2 Non-intended use

Any other use or any use beyond the type of use described is deemed non-intended use.

1.3 Safety Instructions

The safety instructions for the device can be found in the section on "Safety Instructions – Automatic Welders/
Extrusion Welders/Welding Machines" in the document provided.
You can also find this document in the operating instructions on our website.

2. Technical data

Nominal voltage
Nominal output
Frequency
Air temperature
Air volume (20 °C)
Plasticizing temperature
Emission level
Vibration level
Dimensions (L × W × H)
Weight
Conformity marking
Protection class II
Welding rod
(in acc. with DVS 2211)
Ø 3; output
(mean values at 50 Hz)
Ø 4; output
(mean values at 50 Hz)
Subject to change without prior notice.
FUSION 1
120 V
V~
120
W 1450
Hz 50 / 60
°C
%
°C
LpA (dB)
2
a h (m/s )
mm
kg
FUSION 1
120 V
Ø mm
Ø 3 / Ø 4 ± 0.3
kg / h
PE 0.260 – 0.480
PP 0.330 – 0.540
kg / h
PE 0.330 – 0.800
PP 0.350 – 0.830
FUSION 1
220 V
220
1100
60
Approx. 180 – 320
Approx. 230
max. 280
< 70 dB (K = 3 dB)
2
< 2.5 (K = 1.5 m/s )
436 × 92 × 236
3.4
/
FUSION 1
220 V 220 V / 220 – 240 V
Ø 3 / Ø 4 ± 0.3
PE 0.260 – 0.450
PP 0.330 – 0.500
PE 0.330 – 0.750
PP 0.350 – 0.760
FUSION 1
220 – 240 V
230
1200
50 / 60
FUSION 1
21