Service And Transport - Sharp KA-73S56ISS-EU Guide D'utilisation

Table des Matières

Publicité

SERVICE AND
TRANSPORT
REQUIREMENTS BEFORE
CONTAINING TO SERVICE
If the oven does not operate :
The oven may be plugged off, there has
been a black out. On models fitted with
a timer, time may not be regulated.
If the oven does not heat :
The heat may be not adjusted with
oven's heater control switch.
If the interior lighting lamp does not light
:
The electricitiy must be controlled. It
must be controlled whether the lamps
are defective. If they are defective, you
can change them as following the gu-
ide.
Cooking (if lower-upper part does not
cook equally) :
Control the shelf locations, cooking pe-
riod and heat values according to the
manual.
Except these, if you still have any prob-
lem with your product, please call to the
"Authorized Service".
INFORMATION RELATED TO
TRANSPORT
If you need any transport :
Keep the original case of product and
carry it with its original case when need
to be carried. Follow the transport signs
on case. Tape the cooker on upper
parts, hats and heads and saucepan
carriers to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces of
oven.
Tape carboard or paper onto the front
cover on interior glass of oven as it will
be suitable to the trays, for the wire grill
and trays in your oven not damage to
the oven's cover during transport. Also
tape the oven's covers to the side walls.
If does not have the original case :
Take measure for external surfaces
(glass and paintes surfaces) of oven
against possible blows.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ka-73s56ass-eu

Table des Matières