Technical Characteristics - Sonnenkonig SLIM M 1000 Guide D'utilisation

Convecteur électrique

Masquer les pouces Voir aussi pour SLIM M 1000:

Mode d'emploi (33 pages)

Table des Matières

Les langues disponibles

Key features

• Combination of a convection effect (hence the name "convector") with mild thermal radiation

makes the heater an economical thermal energy source, significantly increasing the number

of its followers year by year.

• Simple and efficient ways to control a temperature mode.

• A high-precision controlled thermostat.

• Fast selt-repayment due to a high performance factor and speed of reaching the set temperature.

• Ease of installation, operating reliability and ease of maintenance.

• Three-mode heating for power energy saving.

• Support legs for the convector to be installed in any convenient place.

• Handle and tilt protection

• A built-in fall sensor will switch off the convector if it is turned away from a vertical position,

for example, if it is accidentally tipped over when operated legs.

Dimension of convectors depending on power (Fig.1)

The convectors of the Sonnenkönig series are distinguished by the maximum current consumption

of the heating element and differ from each other by the respective length of the appliances with the

same height and depth. (The standard total height of the devices is 400 mm). This design of the total

mass allows the consumer to use different sun-king convectors side by side in the same room without

disturbing the symmetrical appearance. This allows several devices to be combined perfectly at the

same time.

(Fig. 1)

1000 W