Cleaning, Care And Maintenance; Technical Details - Sonnenkonig 30310088 Mode D'emploi

08 - CLEANING, CARE AND MAINTENANCE

Storage
Before you store the device, make sure that the gasvalve is completly closed and the pressure
regulator disconnected from the gastank. Only put the protection hood on, when device has cooled.
Cleaning
Clean coated surfaces with a soft, damp cloth. Never clean the heater with flammable or caustic
cleaning agents. Make sure that the burner is cleaned regularly. Insects can get caught in the bur-
ner housing and burn during operation.
Maintenance
Perform a leak test after a longer period of non-use. If there is any damage to the technology, do
not use the device and contact customer service.

09 - TECHNICAL DETAILS

Construction properties
• Transportable patio and garden heater with
tank housing
• Housing made of steel with powder coating or
stainless steel
• Gas hose connections with metal clamp (screw
caps for Germany)
• Heat emission reflector
Table of the injector
Gas category 3+ (28 - 30/37)
Gas-Types Butane
Gas pressure 28 - 30 mbar
Total heat input:
13 kW (Butan: 945 g/h • Propan: 928 g/h)
(HS): (QN)
Injector Size
1.88 mm to Mainburner
0.18 mm to Pilorburner
The mark on the injector (e.g. 1.88) indicates that the size of the injector is 1.88 mm
Technical properties
• Only use propane or butane gas
• Max. Wattage: 13 kW
• Min Wattage: 5 kW
3B/P(30)
LPG
Propane
Gasmixture
37 mbar 30 mbar
1.55 mm to Mainburner
0.18 mm to Pilorburner
3 B/P (50) 3B/P(37)
LPG LPG
Gasmixture Gasmixture
50 mbar 37 mbar
1.65 mm to Mainburner
0.18 mm to Pilorburner
EN
53