Maintenance And Cleaning - Sonnenkonig OFR 7 LCD Mode D'emploi

7 Maintenance and cleaning

Warning! For general maintenance and care, observe the general safety conditions. To ensure
trouble-free operation of the heater, the unit must be cleaned regularly. Include the following
procedure:
1. Turn off the heating.
2. Then pull the power cord out of the socket.
3. Remove dust from a cloth or a vacuum cleaner.
4. Clean the outside with a damp cloth. To clean the plastic parts do not use gasoline, solvents
or abrasive agents that can damage the plastic surface.
5. Insert the power cord into the socket.
6. Turn on the device.
MODEL: OFR 7 LCD
Item
Nominal heat output
Minimum heat output (indicative)
Maximum continuous heat output
At nominal heat output
At minimum heat output
In standby mode
Type of heat input, for electric storage local space heaters only (select one)
manual heat charge control, with integrated thermostat
manual heat charge control with room and/or outdoor temperature feedback
electronic heat charge control with room and/or outdoor temperature feedback
fan assisted heat output
Type of heat output/room temperature control (select one)
single stage heat output and no room temperature control
Two or more manual stages, no room temperature control
with mechanic thermostat room temperature control
with electronic room temperature control
electronic room temperature control plus day timer
electronic room temperature control plus week timer
Symbol
HEAT OUTPUT
P
nom
P
min
P
max,c
AUXILIARY ELECTRICITY CONSUMPTION
el
max
el
min
el
SB
Item
33
Value Unit
1.5 kW
0.6 kW
1.5 kW
N.A. kW
N.A. kW
0 kW
Unit
[no]
[no]
[no]
[no]
[no]
[no]
[no]
[yes]
[no]
[no]
EN