Cleaning, Care And Maintenance - Sonnenkonig MAXIMO 1000 Manuel D'instructions

06 - CLEANING, CARE AND MAINTENANCE

Attention! The general safety conditions must be observed during maintenance and care. To ensure
trouble-free operation of the heater, the unit should be cleaned regularly. The following procedure
is recommended for this:
1. Switch off the heater.
2. Then unplug the power cord from the power outlet.
3. Remove the accumulated dust using a cloth or vacuum cleaner.
4. Wipe the housing with a damp cloth. Never use gasoline, solvents or abrasive agents to clean the
plastic parts, as these can damage the plastic surface. Plug the power cord into the power outlet.
5. Switch on the device.
6. Plug in the cable.
7. Adjust the device.
8. To avoid danger, a damaged connection cable may only be replaced by the manufacturer, its cus-
tomer service or a person qualified to do so.
EN
37