Front Display - Yamaha MusicCast R-N602 Mode D'emploi

Front display

:
y
If the network connection is not set, turn the power ON to display "WAC" (Wireless Accessory Configuration) on the front panel and
trigger an automatic iOS device search. See "Sharing the iOS device setting" (p. 16) for details on the iOS device and network
connection.
1 Information display
Displays the current status (such as input name).
You can switch the information that is displayed when you
press DISPLAY on the front panel (p. 41).
2 STEREO
Lights up when the unit is receiving a stereo FM radio
signal.
3 TUNED
Lights up when the unit is receiving an FM/AM radio
station signal.
4 Signal strength indicator
Lights up when the unit connects to a wireless network or
operates as an access point. The strength of the wireless
network signal can be verified by the indicator status.
5 Bluetooth indicator
Lights up when the unit is connecting to a Bluetooth
device.
6 Speaker indicators
"A" lights up when the SPEAKERS A output is enabled
and "B" lights up when the SPEAKERS B output is
enabled.
1 2 3 4 5 6
SLEEP
STEREO TUNED
A
7 SLEEP
Lights up when the sleep timer is on.
8 MUTE
Blinks when audio is muted.
9 Volume indicator
Indicates the current volume.
0 Cursor indicators
Indicate the remote control cursor keys currently
operational.
y
You can change the brightness level of the front display by
pressing DIMMER on the front panel (p. 5).
Controls and functions
7 8 9
MUTE
B
VOL.
:
7
En