Preparation; Controls And Functions; Front Panel; Controlling This Unit With A Remote Control - Yamaha T-S500 Mode D'emploi

PREPARATION

Front panel

1 POWER
Press to turn on/off this unit.
y
The POWER indicator above lights up when this unit is turned on.
2 Front panel display
Displays information of the currently tuned FM or AM
radio station or the operational status.
3 Remote control sensor
Receives signals from a remote control provided with a
Yamaha amplifier or receiver.
4 DIMMER
Changes brightness level of the front panel display.
Choose brightness from 4 levels by pressing this button
repeatedly.
y
This setting is retained even if you turn off this unit.
5 MEMORY
Sets this unit to the preset station memory mode when this
unit is in the FM/AM tuning mode (see page 5).

Controlling this unit with a remote control

This unit has a remote control sensor. It receives signals
from a remote control provided with a Yamaha amplifier
or AV receiver.
Approximately 6 m
(20 ft)
2
En

CONTROLS AND FUNCTIONS

30º 30º
6 CLEAR
Clears the preset stations (see page 5).
7 FM MODE
Switches the FM radio wave reception mode (stereo or
monaural) when this unit is in the FM tuning mode (see
page 4).
8 FM/AM
Selects the reception band (FM or AM).
9 TUNING MODE
Selects the tuning mode (automatic, manual, or preset
tuning) when this unit is in the FM/AM tuning mode (see
page 4).
0 PRESET/TUNING
• Selects the preset FM or AM stations or services when
this unit is in the preset tuning mode.
• Selects the FM or AM stations or services when this
unit is not in the preset tuning mode.
Notes
• Do not place any large obstacles between the remote control
and this unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type fluorescent lamp), you may
not be able to control this unit using the remote control. In this
case, reposition this unit to avoid direct lighting.