Connecting The Fm And Am Antennas - Yamaha MusicCast R-N602 Mode D'emploi

Connecting the FM and AM antennas

The antennas for receiving FM and AM broadcasts are included with this unit. In general, these antennas should provide
sufficient signal strength. Connect each antenna correctly to the designated terminals.
Note
If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center
about outdoor antennas.
FM antenna Outdoor
or
(included) FM antenna
PHONO
IN
1
IN
2
OUT
IN
3
OUT
LINE
■ Assembling the supplied AM antenna
SIGNAL
GND
ANTENNA
FM AM
1
OPTICAL
2
75Ω
1
COAXIAL
SUBWOOFER
2
PRE OUT
CD
AM antenna (included)
• The AM antenna should always be connected, even if an outdoor
AM antenna is connected to this unit.
• The AM antenna should be placed away from this unit.
Outdoor AM antenna
Use 5 to 10 m of vinyl-covered wire extended
outdoors from a window.
■ Connecting the wires of the AM antenna
1
Hold down
Connections
2
Insert
13
En