Sharing The Ios Device Setting - Yamaha MusicCast R-N602 Mode D'emploi

Connecting to network

Sharing the iOS device setting

You can easily setup a wireless connection by applying the
connection settings on iOS devices (iPhone/iPod touch).
Before proceeding, confirm that your iOS device is
connected to a wireless router (access point).
If the network connection is not set, when you turn on
this unit, "WAC" (Wireless Accessory Configuration)
appears on the front display, and search automatically
iOS device. You can automatically share the network
settings.
WAC
R-N602 XXXXXX
If the unit is already wire connected and also
connected to a wireless network by another method,
settings will not be shared automatically. To manually
share the iOS device network settings, perform the
following operation.
MEMORY
Cursor keys B / C
ENTER
HOME
SETUP
SETUP
NOW PLAYING
1
Press A to turn on this unit.
2
Press SETUP.
3
Use the cursor keys (B / C) to select
"Network" and press ENTER.
y
To return to the previous state, press RETURN.
4
Use the cursor keys (B / C) to select
"Connection" and press ENTER.
5
Use the cursor keys (B / C) to select
"Wireless" and press ENTER.
WIRELESS
WPS
16
En
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
6
Use the cursor keys (B / C) to select "Share
Setting" and press ENTER.
SHARE
Wireless(WAC)
7
Use the cursor keys (B / C) to select the
desired connection method and press
ENTER.
The following connection methods are available.
You can apply the connection settings on the iOS
device to the unit using a wireless connection. For
Wireless
details, see "Sharing the iOS device setting
(WAC)
wirelessly". (You need iOS device with iOS 7 or
later.)
You can apply the connection settings on the iOS
device to the unit using a USB cable. For details, see
USB
"Sharing the iOS device setting using a USB cable".
Cable
(You need iOS device with iOS 5 or later.)
Note
When you select "Wireless (WAC)" as the connection method, all
network settings are initialized.
■ Sharing the iOS device setting wirelessly
If you select "Wireless (WAC)" as the connection method,
perform the network setting sharing operation on your iOS
device. (The following procedure is a setup example for
iOS 8.)
1
On the iOS device, select the unit as the
AirPlay speaker in the Wi-Fi screen.
2
Check the network currently selected and tap
"Next".
The name of this unit
Tap here to start setup
The network currently
selected