Adjusting The Loudspeaker Volume - Gigaset 5040 Mode D'emploi

Masquer les pouces Voir aussi pour 5040:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To set while the telephone is ringing:
0
9
...
Press one of the keys 0 through 9.
Setting the handset volume
The volume on the handset can be set to one of 3 levels
and saved (default setting is level 1).
Lift the handset and press
The last value set is saved.
Mute
You can deactivate the telephone's handset and
microphone so that the other party can no longer hear
you.
J
During a call: Press the Mute key
Activate again: Press the key again.
This function is automatically cancelled when the call
ends.
Activating/deactivating the mute melody
You can activate and deactivate the mute melody for the
mute (default setting is "off").
º19#
Hold down the Set key, then press the num-
ber 1 key, and the number 9 key. Press the
Pound key.
0
1
/
Press one of the keys below.
0 to deactivate, or 1 to activate.
º
Hold down the Set key.

Adjusting the loudspeaker volume

While in handsfree mode, you can set the volume to one
of 7 levels and save it (default setting is 1).
H
I
...
Adjust the volume with the Loud/Quiet key.
H
I
...
.
9
en
Activating/deactivating the telephone lock
The telephone can be locked so that it cannot dial any
phone numbers (with the exception of a baby call
phone number if set). You can continue to receive
incoming calls.
#
Hold down the Telephone lock key.
Press it again to unlock the telephone.
When the telephone is locked, you will see the
bol in the display.
Baby call (direct call) number setting
If a phone number is set for the Baby Call function, it is
dialed automatically only when the telephone is
locked after you lift the handset (or press the Loud-
#
speaker key) and press any key (except holding down
). The telephone does not allow other phone num-
bers to be dialed, but incoming calls can be received.
º8
Hold down the Set key, then press the num-
ber 8 key.
o
Enter direct call number (max. 32 digits).
º
Hold down the Set key.
When the Baby Call function is activated and the tele-
phone is locked, you will see the
the display.
Deactivating
Baby Call is deactivated when you deactivate the tele-
phone lock.
Deleting a baby call phone number
º1252
Hold down the Set key, then press the keys
1, 2, 5, 2.
º
Hold down the Set key.
{
sym-
ƒ
{
and
symbols in

Publicité

Table des Matières
loading

Table des Matières