GEARSTONE CS-WP7 Mode D'emploi page 15

12 Operating Instructions
PAUSE
2. Electronic meter function buttons: start/stop, speed +, speed -, 6 km/h, 15 km/h,
pause.
A. Start/Stop: In the stopped state, press this button to start up. Press this key in the
running state, the treadmill will decelerate and stop.
B. Speed －: During the movement, the button will reduce the speed.
C. Speed +: During the movement, the button will increase the speed.
D. Pause: During exercise, pressing this key will pause the exercise.
E.6 km/h: 6 km/h shortcut in running mode.
F.12 km/h: Shortcut key for running mode 15 km/h.
4. Start-up Instructions
1. Put the safety lock on the safety lock position on the panel, turn on the power switch,
the buzzer will beep, and then enter the manual normal mode.
2. Press the start button, the time window will display a countdown of 3 seconds, and
the buzzer will beep once every time it is subtracted, and then startup.
3. Starting speed : 1KM/H. At this time, you can press the speed + and － keys, or
manual induction to adjust the speed.
4. Running in the normal mode, the time is running positively, and the speed is fixed
and can be adjusted manually.
5. Safety Lock Function
In any state, pull off the safety lock, the window displays "E07", and the buzzer BI-BI-BI
beeps three times. If it is in operation, it will stop urgently. When the safety lock is off,
operations such as starting cannot be performed.
6. Power Saving Mode
This system has a power-saving function. In the standby mode, if there is no key
command input within 10 minutes, the system enters the power-saving mode,
automatically turns off the display, and presses any key to wake up the system again.
KM/H
KM/H
SPEED
START
SPEED