GreenWorks GLM801601 Guide D'utilisation page 7

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAfETY InfORMATIOn
for battery pack storage longer than 30 days:
• Store the battery pack where the temperature is below 80°f and away from moisture.
• Store battery packs in a 30%-50% charged condition.
• Every two months of storage, charge the pack as normal.
cHARGER sAFETY RuLEs
• Charge the mower battery in a dry area that is protected from the weather. Do not expose the
mower or the charger to rain. Do not charge the battery in a wet location. Operate the battery
charger in temperatures between 45° and 104°f. In order to reduce the risk of electric shock,
use only the charger that is provided by the manufacturer to charge the battery.
• DO nOT ABUSE THE CHARGE CORD. never carry the charger by the cord. Do not
disconnect the charger from the outlet or from the mower by pulling the charger cord.
• Do not use a damaged charger. Replace the charger cords or the charger immediately.
• Keep the mower and the charger away from water, heat sources (radiators, heaters, stoves,
etc.), flames, and chemicals.
• Make sure the battery pack is secured in the charger before beginning operation.
• The battery pack will become slightly warm to the touch while charging. This is normal and
does not indicate a problem.
• Do not place the charger and battery pack in an area of extreme heat or cold. They will work
best at normal room temperature.
• When batteries become fully charged, unplug the charger from the power supply and remove
the battery pack.
w A R N I N G
When transporting or servicing unit, always remove the battery.
w A R N I N G ( P R O P O s I T I O N
Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contains chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemical: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially designed to filter out microscopic
particles.
sAVE THEsE INsTRucTIONs
6 5 )
7 7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2500402

Table des Matières