Whirlpool Super Capacity 465 YSF377PEG Guide D'utilisation page 10

USING YOUR RANGE
T
HE ELECTRONIC OVEN CONTROL
Indicator
lights
(see below )
Bake pad
(pp. 13, 15)
Custom broil
pad
(pp. 16, 17)
Display/clock
•
When you first plug in the range, "PF" will appear
on the display until you press any command
pad. If "PF" again appears on the display, your
electricity was off for a while.
•
When you are using the oven, the display will
show preheat times and temperature settings.
•
When you are not using the oven, the display
shows the time of day.
•
When showing the time of day, the display will
show the hour and minutes.
•
When you are using the minute timer, the display
will count down each minute.
•
When setting a function, if you do not press
START/ENTER within 5 seconds, the Start?
indicator light will flash. If you do not press
START/ENTER within 5 minutes, the function
will be canceled.
•
When you are using COOK TIME, the display will
show hours and minutes or minutes
COOK
and seconds.
TIME
Indicator lights
An indicator light to the left of the display lights up
when you are in a setting. An indicator light on the
display lights up when the oven is on.
10
COOK TIME/
TIMED
BAKE
BROIL
HEAT
CLEAN
DOOR
LOCKED
START TIME/ TIMER
DELAY
CUSTOM AUTO
BAKE
BROIL CLEAN
TIME
Auto clean
Temperature/
pad
time pad
(p. 25) (pp. 11, 13, 15,
17, 19, 21, 25)
Electronic
display
ON
SELF CLEANING OVEN
START?
START
CLOCK
TIME
START
ENTER
COOK TIMER
TIME
• • CANCEL
5 SEC
Start time/ Clock/timer pad
(pp. 11, 12)
Cook time pad
(pp. 19, 21)
Using the control lock
The control lock lets you disable the control panel
command pads. The control lock comes in handy
when you want to prevent others from using
the oven.
NOTES:
•
You can only use the control lock when the oven
is not in use or the control has not been set.
•
Set the control lock when cleaning the control
panel to prevent yourself from accidentally turning
on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and "Loc" will
appear on the temperature display for 5
START
seconds. "Loc" will then appear whenever
ENTER
a command pad is pressed.
5 SEC
To unlock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and "Loc" will
disappear from the temperature display.
START
ENTER
5 SEC
Start/enter pad
(pp. 10, 11, 12,
14, 15, 16, 20, 25)
OFF
Off/cancel
CANCEL
pad
(pp. 12, 14,
15, 16, 20, 25)