Led At The Front Of The Housing - Resol VBus/LAN Manuel

5

LED at the front of the housing

The VBus / LAN interface adapter has 1 bi-coloured LED
®
at the front of the housing and 2 LEDs at the RJ45 LAN
connector.
The bi-coloured LED at the front of the housing indicates
the current operating status of the VBus
adapter:
LED flashes green:
Adapter is booting
LED is permanently green:
Normal operation, access is now possible
Static IP address / IP address obtained from a DHCP server
LED slowly flashes green:
Normal operation, access is now possible
IP address has been generated by the device
LED irregularly flashes green:
Normal operation, data traffic
LED flashes red / green:
No network connection / IP address lost
LED quickly flashes red:
Reset in progress
LED is permanently red:
Reset completed
26
5.1 Status LEDs at the RJ45 LAN connector
At the RJ45 LAN connector there are 2 status LEDs which
indicate the status of the network connection:
10/100 Link / Activity LED:
LED glows: Network connection ok, no data traffic
® / LAN interface
LED flashes irregularly: data traffic
Full duplex LED:
LED glows: Full duplex active
10/100 Link / Activity LED Full duplex LED