Kenwood STZ-RF200WD Manuel D'instructions page 5

• Store SD cards, packing materials or unused accessories such as screws in a lo-
cation away from small children.
• Plug in the power cable correctly
• Hold the in-line connectors when unplugging the power cable
• Disconnect the in-line connector for power cable when not using the Motorsports
CAM for extended periods of time
• Make sure to use the included parts and specified components
• Clean the power cable at the battery connection point periodically
Use
• Do not remove the SD card or disconnect in-line connectors with wet hands.
It could result in fire, electric shocks, or malfunction.
• Do not disassemble repair or try to modify the unit.
It could result in traffic accidents, fire, electric shock, or malfunction.
Modifying the unit or using a modified unit is also a violation of the Radio Act and the
Telecommunications Business Act.
• This unit is intended only for vehicles with a DC 12V power supply.
Using this unit in any other voltage environment besides 12V DC such as 6V, 24V or other
could result in fire and/or damage.
• Do not use if damaged or malfunctioning.
If foreign matter enters the unit, or if it produces smoke, abnormal noise, or peculiar
odors, stop use immediately and disconnect the power cable.
• Never use the associated cell phone app while driving.
Only use it once you have parked in a safe location.
• Can we say use caution when using the switch or the need to glance at the status
indicator.
Driving safely should be prioritized.
• Do not conduct risky behavior, such as sudden starts or braking, to test whether
the unit is working.
• Do not use the unit if there is condensation on it.
It could result in malfunctions, heat buildup, or electric shocks.
• Do not subject the unit to strong impacts, like drops, hits, etc.
It could result in malfunctions or damage.
• Do not place items with strong magnetic fields near the unit
It could result in a malfunction.
• Do not let the unit come into contact with gasoline, liquids, organic solvents, brake
fluids, etc.
It could result in malfunctions or damage.
• Do not wash the unit or camera when cleaning your vehicle with a pressure washer
It could result in a malfunction.
• Secure disconnected in-line connectors with tape to prevent water or foreign mat-
ter from entering
It could result in a malfunction.
• Always use fuses of the specified capacity and ask a specialist to replace them.
If a fuse above the specified capacity is used, it could result in fire or malfunction.
5