Appendix - Kenwood STZ-RF200WD Manuel D'instructions

Appendix

Wireless Link Specifications
Standard
Security
Frequency Range
Transfer Rate
Output Power
On Wireless Link Security
Since the Wireless Link communicates over radio waves, there is the benefit that you are able to access
the Link freely as far as the radio waves reach. On the other hand, without proper security settings there
may be a risk of hacking or abusive invasion by malignant third parties. We recommend that you use
Wireless Link after setting up proper security of the devices connected.
Please note that we are not liable for any damage or troubles pertaining to security when using this
function.
Radio Interference with Bluetooth Devices
With the Wireless Link in use, if Bluetooth devices are in operation nearby, there may be radio interfer-
ence causing reduced transmission speeds or disconnections. In this case, please do not use the devices
simultaneously.
IEEE802.11ac (Default Settings)
WPA2
5735-5835 MHz
433 Mbps (802.11ac)
12 dBm ±2 dB (802.11ac)
IEEE802.11n (Optional Settings)
WPA2
2400-2473 MHz
150 Mbps (802.11n)
12 dBm ±2 dB (802.11n)
22