Ce Declaration Of Conformity - APRITECH Antes 230 Mode D'emploi

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. ELECTRICAL SET-UP
3. INSTALLING THE AUTOMATED SYSTEM
3.1. PRELIMINARY CHECKS
3.2. INSTALLING THE OPERATOR
3.3. INSTALLING THE RACK
3.4. POSITIONING THE STROKE-LIMIT MAGNETS
4. START-UP
5. AUTOMATED SYSTEM TEST
6. MANUAL MODE OPERATION
7. SPECIAL APPLICATIONS
8. MAINTENANCE
9. REPAIRS
APRITECH ITALIA SRL
Manufacturer:
Address: Via Mazzini, 121- 66020 - San Giovanni Teatino - Chieti- ITALY
Declares that: Operator mod. ANTES 230
is built to be integrated into a machine or to be assembled with other machinery to create a machine under the provisions of Directive 2006/42/EEC;
conforms to the essential safety requirements of the following EEC directives:
2006/95/EC Low Voltage directive.
2004/108/EC Electromagnetic Compatibility directive.
and also declares that it is prohibited to put into service the machinery until the machine in which it will be integrated or of which it will become a com-
ponent has been identified and declared as conforming to the conditions of Directive 2006/42/EEC and subsequent modifications.
San Giovanni Teatino 15/03/2012
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol
INDEX

CE DECLARATION OF CONFORMITY

(DIRECTIVE 2006/42/EC)
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
draws your attention to the notes on the characteristics and operation of the product.
Managing Director
Davide Di Renzo
6
page.7
page.7
page.7
page.7
page.7
page.8
page.9
page.10
page.10
page.10
page.10
page.10
page.10