Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9
Remove the cable clip
Remove the cable clip connected to
the wire end of the cable, but do
not discard it; you'll need it in a few
steps.
10
Connect the charging cable
+
Fold the wire ends and insert them into the
bottom hole of the station
+
Match the green/yellow wire to the green
connector block and the black/white wire to
the blue connector block
+
Insert the exposed wires into the
corresponding holes, pushing the cables up
until the metal conductors are no longer visible
+
Snap the white levers all the way down on
each wire
chargepoint.com 7
Publicité
Table des Matières
