Charging In The Smartclean System (Specific Types Only); Using The Appliance - Philips S7000 Serie Mode D'emploi

16
English
Charging in the SmartClean system (specific types
only)
1
3
2

Using the appliance

1 Put the small plug in the back of the
SmartClean system.
2 Put the supply unit in the wall socket.
3 Press the top cap to be able to place the shaver
in the holder ('click').
4 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system holder.
5 Place the shaver in the holder, tilt the shaver
backwards and press down the top cap to
connect the shaver ('click').
The battery symbol starts to flash to indicate
that the appliance is charging. When the battery
is fully charged, the battery symbol lights up
continuously.
(S7780/64, S7720/31, S7710/26 only)
Note: This appliance can only be used without
cord.