Charging With The Adapter; Charging In The Smartclean System (Specific Types Only) - Philips S99 Série Mode D'emploi

ENGLISH
18
2
1

Charging with the adapter

1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance (1) and put
the adapter in the wall socket (2).
Charging in the SmartClean system (specific
types only)
1 Put the small plug in the SmartClean system.
2 Put the adapter in the wall socket.
3 Press the top cap to be able to place the shaver
in the holder ('click').
4 Hold the shaver upside down above the holder.
Make sure the front of the shaver points towards the
SmartClean system.
5 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
Note: The battery symbol flashes slowly to indicate the
appliance is charging.