Charging With The Adapter - Philips 1000 Série Mode D'emploi

10
English
General
Charging

Charging with the adapter

2
1
Charge indications
- The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
It takes approx. 8 hours to fully charge the
appliance. When you charge the appliance for the
first time or after a long period of disuse, let it
charge until the charging light lights up
continuously. A fully charged appliance provides
up to 45 (S1520), 40 (S1510) or 35 (S1320, S1310)
minutes of shaving time.The shaving time may be
less than 45, 40 or 35 minutes as a result of your
shaving behavior, your cleaning habits or your
beard type.
1 Put the small plug in the appliance.
2 Put the adapter in the wall socket.
- The charging light shows the charging status of
the appliance (see section 'Charge indications'
in this chapter).
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
appliance.
Battery low
- When the battery is almost empty (when there
are only 5 or fewer shaving minutes left), the
charging light starts to flash orange.
- When the battery is completely empty, the
charging light starts to flash orange quickly.