Using The Smartclean System - Philips S99 Série Mode D'emploi

ENGLISH
24
6 Push the top part of the SmartClean system back
down ('click').

Using the SmartClean system

Always make sure to shake excess water off the shaver
before you place it in the SmartClean.
1 Press the top cap to be able to place the shaver in
the holder ('click').
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points towards the
SmartClean system.
3 Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
, The battery symbol starts to flash, which indicates that
the shaver is charging.