Philips S99 Série Mode D'emploi page 34

ENGLISH
34
Problem
The shaver does
not work when
I press the on/off
button.
The shaver does
not shave as well
as it used to.
Troubleshooting
This chapter summarises the most common problems
you could encounter with the appliance. If you are unable
to solve the problem with the information below, visit
www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Centre
in your country.
Possible cause
The shaver is still
attached to the mains.
For safety reasons, the
shaver can only be used
cordlessly.
The rechargeable
battery is empty.
The travel lock
is activated.
The shaving heads are
damaged or worn.
Hairs or dirt obstruct
the shaving heads.
Solution
Unplug the shaver and press
the on/off button to switch on
the shaver.
Recharge the battery
(see chapter 'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Replace the shaving heads
(see chapter 'Replacement').
Clean the shaving heads
(see chapter 'Cleaning and
maintenance').
Clean the shaver thoroughly
before you continue shaving
(see chapter 'Cleaning and
maintenance').