Using The Smartclean System - Philips S5000 Série Mode D'emploi

6 Push the top part of the SmartClean system
back down ('click').

Using the SmartClean system

Always make sure to shake excess water off the
shaver before you place it in the SmartClean
system.
1 Press down the top cap to be able to place the
shaver in the holder ('click').
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
3 Place the shaver in the holder, tilt the shaver
backwards and press down the top cap to
connect the shaver ('click').
- The battery symbol flashes slowly to indicate that
the shaver is charging.
ENGLISH
19