Operation - Daikin AHT KINLEY X5 Mode D'emploi

10 | Operation

Contact with live parts may result in electric
shock. Flammable refrigerant can escape and
cause an explosive gas/air mixture. Fire haz-
ard due to sparking or overload.
§ Do not operate a damaged appliance.
§ Do not connect any damaged parts to the
power supply, e.g. connecting cables.
§ Only qualified staff may replace damaged
parts, e.g. connecting cables.
§ Observe safety notices and warnings for
appliances with flammable refrigerants
[see } Chapter 2.2].
§ In the event of damage to the appliance,
promptly contact the maintenance service
[see } Chapter 12.4].
NOTICE
Property damage due to incorrect ambient
conditions.
§ Adjust the appliance to match the ambient temper-
ature prior to start-up.
§ The ambient temperature must not fall below 16°C
(60.8°F).
a) Insert the mains plug of the appliance connecting
cable [see } Chapter 8.1].
b) For appliances with their own light connection,
also plug in the mains plug of the light connecting
cable.
The cooling unit starts to operate after a delay of max.
2 minutes.
After start-up, it may take up to 3 to 4 hours until the
desired temperature is reached.
10 Operation
Only trained operating personnel may operate the ap-
pliance.
WARNING
Damage to the electrical system and/or
the refrigerant circuit.
Contact with live parts may result in electric
shock. Flammable refrigerant can escape and
cause an explosive gas/air mixture. Fire haz-
ard due to sparking or overload.
§ Do not allow external forces to act on the
appliance, e.g. careless handling with a lift
truck or floor cleaning machine.
§ Avoid transmitting pulsations and vibra-
tions to the appliance.
§ Observe safety notices and warnings for
appliances with flammable refrigerants
[see } Chapter 2.2].
§ If the appliance is damaged or the elec-
trical fuse protection is tripped:
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
54 / 788
tion.
3. Contact the maintenance service
[see } Chapter 12.4].
CAUTION
Glass breakage.
Lacerations to body parts. Impact injury.
§ Check that glass doors are closed.
§ Ensure free passageways when glass
doors are open.
§ Do not load glass doors.
§ It is forbidden to store glass containers in
freezers.
§ Do not open glass doors more than 90°.
§ Do not suspend any objects on the door or
on the door handle.
§ Close glass door immediately and com-
pletely after loading.
§ Check glass elements for damage, e.g.
cracks, breaks. In the event of damage,
promptly contact the maintenance service
[see } Chapter 12.4].
§ Hinges on glass doors must be securely
fitted. Otherwise, contact the maintenance
service [see } Chapter 12.4].
Dispose of broken glass.
Hand and body cuts.
§ Wear protective gloves to remove split
glass parts and goods that may have been
damaged as a result.
§ Carefully and completely remove all split
glass parts and damaged goods.
NOTICE
Material damage due to misuse.
§ Operate the appliance in a stable operating posi-
tion (horizontal alignment).
§ Only operate the appliance with the appliance feet
pre-assembled by the manufacturer.
§ Check that the appliance is in good, proper condi-
tion. Any damage must be repaired immediately.
Property damage due to misuse.
§ Do not operate the appliance above the climate
class stated on the rating plate
[see } Chapter 3.2.1].
§ The ambient temperature must not fall below 16°C
(60.8°F).
§ Observe the prescribed storage temperature of the
stored products.
§ Check the interior temperature
[see } Chapter 5.1].
AHT Cooling Systems GmbH | en
376840_1_0920