System Requirements; Installation Instructions - USRobotics R24.0715.00 Guide D'installation Rapide

System Requirements

!
ADSL line installed by your Internet Service Provider
!
For USB Installation: Windows Vista™, Windows® XP, Windows 2000, Windows
Me, or Windows 98SE
!
A computer with an Ethernet or USB internet connection with Ethernet interface or
adapter
!
An HTML 4.01-compliant Web Browser (such as Internet Explorer 5.5 or later or
Netscape 8.0 or later) with JavaScript enabled

Installation Instructions

Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference between
voice and DSL signals. If a microfilter was not
included with the router, ask your ISP if microfil-
ters are necessary for your telephony devices.
1. Plug each telephony device cable (telephone,
fax machine, etc.) into a microfilter.
2. Plug the microfilter into the telephone wall
jack.
Note: Do not install a microfilter on the cable that will connect your router to
the telephone jack unless you have a dual connection microfilter with a
connection for both the router and the telephone.
Step Two: Connect Your Router to Your ADSL
Line
1. Connect one end of the included phone cable to
the ADSL port on the router.
2. Connect the other end of the phone cable to a
wall phone jack.
9VDC
Reset
3