Names And Functions Of Parts; Front Panel - Sony HKDV-900 Mode D'emploi

Names and Functions of Parts

Front panel

Output selection section
HKDV-900
Video control selection section
All buttons except the STORE, LOAD, CANCEL, and –/+ buttons on the memory section turn on or off each time
they are pressed.
Video control selection section
In the video control selection section, you can select
the external device whose video output signal is to be
adjusted. Press (to light up) the CONTROL SELECT
button for the desired device. These buttons
correspond to devices connected to the REMOTE
OUT (TO VTR) 1, 2, 3, and 4 connectors. Note that
not more than one device can be selected at a time.
To cancel the selection
Press the button again to turn it off. If you press
another button, the currently selected button
automatically turns off.
1 2 3 4
1 CONTROL SELECT button 1
Press to select the device connected to the REMOTE
OUT (TO VTR) 1 connector.
2 CONTROL SELECT button 2
Press to select the device connected to the REMOTE
OUT (TO VTR) 2 connector.
Level adjustment section
Memory section
3 CONTROL SELECT button 3
Press to select the device connected to the REMOTE
OUT (TO VTR) 3 connector.
4 CONTROL SELECT button 4
Press to select the device connected to the REMOTE
OUT (TO VTR) 4 connector.
Output selection section
The output selection section selects the output signal to
which the adjustments in the level adjustment section
apply. When you press one of these buttons, the newly
selected button lights.
Changing the output selection makes all of the
adjustment knobs apply to the selected signal. It is not
possible to make a multiple signal selection.
1 HD button
2 D1 button
3 D2 button
4 IMAGE ENHANCER button
3(GB)