Bang & Olufsen BeoVision Avant 32 DVD MKI Mode D'emploi page 39

5.12 Repair tips, English
Service counters
Text registers
0
English Polish
German German
Swedish Swedish
Italian Italian
French French
Portuguese Serbocroat
Czech/Slovak Czech/Slovak
Rumanian
Monitor service counters
Standby (days)
Audio mode (days)
Video mode (days)
On/off (times *10)
DVD playback (days)
VCD playback (days)
CDAudio playback (days)
DVD Power on (times *10)
Loader closed (times *10)
(times *10) = The numbers are stated in interval of 10 (e.g. 10 = 100). The
number is given in full tens. If the number exceeds four digits, the four least
signifi cant digits are shown (e.g. 12834 is shown as 2834).
The other times in the menu are shown in full days.
Text Register setup
R01
5
R09
0
Selecting "Set" makes it possible to choce from 7 different teletext character set.
1 2
English
German
Swedish
Italian
French
Portuguese
Turkish
Group delay errors in certain cable aerial systems can disturb the reception of
teletext. This is prevented by connecting a fi lter in series with the CVBS signal
applied to the teletext decoder.
The numbers below the Register numbers R01 - R10 are programme numbers. If
all the numbers are 0, no fi lter has been connected on any programme number.
If you wish to connect a fi lter on a programme number, select a register by
l
pressing
In the example above a fi lter has been connected on programmes 5 and 11. The
fi lter is not engaged until the next time you switch to the programme in question.
0000
0000
0000
0000
0000
0000
0000
0000
0000
R02 R03 R04
11 0 0
R10 Set
0 0
3
English English
Russian German
Estonian Swedish
Czech/Slovak Italian
German French
Lithuanian/Lettish Portuguese
Ukranian Turkish
Greek
n
/ , then press the desired programme number, and fi nally press GO.
R05 R06 R07
0 0 0
4 5
English
Arabic
French
R08
0
6
English
Hebrew
Arabic