Rs-232 Parameters - Adam Equipment Gladiator GGS 8 Mode D'emploi

7.2

RS-232 PARAMETERS

This group of parameters can be set by the user for setting the RS-232 active or not, baud
rate, printing mode, accumulation mode, RS-232 language, and user or scale ID numbers.

Pressing the [Func/Set] key and holding for 2 seconds during normal
operation allows the user to access the parameters.
Scroll through the list of functions using the ⭡ and ⭣ directional keys. Press

[Tare/↵] to enter the 'rs 1' or 'rs 2' parameters when appearing on the
display.

'Rs 1' will provide access to 'Print', 'PC' and 'Cmd' settings. 'Rs 2' includes
'PC' and 'Cmd' only. Press [Tare/↵] to confirm.

When entering a mode, the user will be required to go through each step of
the process by entering the desired values or selecting from the options listed
in the table below and pressing the [Tare/↵] key to confirm.

Press [0/Esc] to exit the scale parameter section and return to normal
weighing.