XYZ Printing da Vinci Color AiO Manuel De L'utilisateur page 18

Function Operation and Instructions
Filament
D3
Refer to the Change Filament function in the main screen.
WiFi
D4
Before turning on the printer and setting
up the WiFi network, please insert the
WiFi dongle into the USB port on the
top of printer.
1. Tap ADD and the printer will
start to search for available
access points.
Use the XYZmaker to verify if the WiFi connection is established successfully
Use a USB cable to connect the printer to the computer and run the XYZmaker.
●
Check if the WiFi function is activated on the computer and connect to the access point.
●
1. Run the XYZmaker. Click on File > Print > da Vinci Printer Plugin.
3. When the software displays "READY", the
connection is established successfully.
Now, you can click on "DASHBOARD" to
monitor the printer or "PRINT" to print a
file.
Unused filament for one day of longer should be stored in zip-lock bag.
2. Tap the access point to be
used.
DASHBOARD: Monitor print head tempera-
ture, filament used and filament loading /
unloading.
3. Enter the password for the
access point.
2. Select the printer to be used.
PRINT: Set printing parameters and quality.
If only a file conversion is needed, tap "PRE-
PARE".
4. Confirm the connection is
completed.
P18 P18