Color Calibration - XYZ Printing da Vinci Color AiO Manuel De L'utilisateur

Function Operation and Instructions
C2-3 Ink Calibration
1. Tap Calibration.
6. For horizontal alignment, enter each
color's corresponding number. After
entering the number, tap PROCEED.
C2-4 Ink Calibration
1. Tap Inkjet Calibration.
Caution: Please ensure the EZ Removable Rubber Magnet had
placed in the printbed.
5. The printer will print the
calibration card automatically.
This takes approximately 15
minutes. (Make sure you have
loaded the filament.)
7. Horizontally and vertically,
find the box where the ink is
the most aligned, and then tap
PROCEED.

Color Calibration

2. Tap Color.
4. Take out the printed paper and tap
PROCEED.
7. For vertical alignment, enter each
color's corresponding number. After
entering the number, tap PROCEED.
Inkjet Calibration
2. Inkjet Calibration.
8. Vertical direction: Enter the
number of the box you think the
filament and ink align the most,
and then tap PROCEED.
3. Please fix the printing paper onto the print bed.
5. Check the printed calibration chart using the on-
screen instructions. For each color select the line that
is the best aligned with black (K).
8. Confirm the numbers entered in the
boxes and tap PROCEED.
3. Check that the print bed is
clear, then close the door.
6. After the printing is completed,
take out the calibration card.
9. Horizontal direction: Enter
the number of the box you think
the filament and ink align the
most, and then tap PROCEED.
4. The printing operation will
start once the print nozzle is
warmed up.
10. After the calibration is
completed, tap PROCEED to
finish the ink calibration.
P14 P14