Sony DXF-51 Mode D'emploi page 22

Location and Function of Parts and Controls
6 CONTRAST control 1)
Turn to adjust the contrast of the picture on the viewfinder
screen.
7 BRIGHT control 1)
Turn to adjust the brightness of the picture on the viewfinder
screen.
8 Viewfinder fixing ring
Fix the viewfinder to the camera.
9 TALLY ON/OFF switch
Enables and disables the external tally lamp.
ON: The external tally lamp turns on and off, as the
camera mode changes.
OFF: The external tally lamp does not light, regardless of
the camera mode.
0 PEAKING ON/OFF switch
Set this switch to on to use the PEAKING control.
qa PEAKING control 1)
Adjusts the outline intensity of the viewfinder image.
---------------------------------------------------------------------------------------------------------------------------------------------------------
1) These controls affect only the viewfinder screen. They have no effect on
the signal being output by the camera.
22
qs SHUTTER/GAIN indicator
Lights while the shutter, the gain control, or the AGC
function is switched on.
qd R indicator
Lights while the second tally is on in recording.
qf Auxiliary indicator
Signal warning indicator auxiliary lamp (excludes
SHUTTER/GAIN).