Location And Function Of Parts And Controls - Sony DXF-51 Mode D'emploi

Location and Function of Parts and Controls

qf Auxiliary indicator
qd R indicator
qs SHUTTER/GAIN indicator
qa PEAKING control
0 PEAKING ON/OFF switch
9 TALLY ON/OFF switch
1 TALLY G indicator (green)
Lights while the camera is monitoring.
2 TALLY R indicator (red)
Lights while the camera is recording.
3 External tally lamp (red)
Lights while the camera recording when TALLY switch set
to on.
1 TALLY G indicator (green)
4 LOCK screw
Adjusts the angle of viewfinder in the vertical direction.
5 D-sub 26-pin connector
Connects 20-pin connector (supplied) to the VF (viewfinder)
connector of the host camera. This connector carries the
video signal, tally signal and power.
2 TALLY R indicator (red)
3 External tally lamp (red)
4 LOCK screw
5 D-sub 26-pin connector
6 CONTRAST control
7 BRIGHT control
8 Viewfinder fixing ring
21