Advanced Measurement Modes And Functions - General IRT105 Manuel De L'utilisateur

To temperature-scan the surfaces of a room or any
environment, press the Meas. (measure) button and keep
pressing it as you point the IRT in various directions. Note that
the display tracks the different temperatures of different
surfaces in real time.
To power off the IRT105, either press and hold the Mode
button or let the auto power off function turn the IRT off after
15 seconds of inactivity.
ADVANCED MEASUREMENT MODES
AND FUNCTIONS
The Mode button below the Meas. button is the gateway to
the IRT105's five advanced measurement and selection
modes (see Figure 3).
Press 1x to
enter MAX
Measurement
mode
Press 5x
Press 2x to
to enter
enter MIN
Emissivity
Measurement
Selection
mode
mode
Press 4x to
Press 3x to
enter °C/°F
enter
Selection
Measurement
mode
Lock mode
Fig. 3. The Mode button provides access to the IRT105's five
advanced measurement and selection modes
8