General IRT-206 Guide Rapide

1. Introduction
Thank you for purchasing this infrared thermometer.
This infrared thermometer is a non-contact infrared
temperature measuring instrument. Features include a
4 digits backlit LCD, scan/hold function and auto power
off (6 second). To measure a temperature, point the unit
at the object, pull the measuring trigger and hold. Make
sure the target area is larger than the unit's spot size.
2. Safety Information
Read the following safety information carefully before
attempting to operate or service the meter. Only
qualified personnel should perform repairs or servicing
not covered in this manual.
2-1 Cautions!
• DO NOT submerge the unit in water.
• This product is not designed for use in medical
evaluations. The product can only be used to
measure body temperature simply for reference.
They are meant for industrial and scientific purposes.
LASER WARNING NOTE!
Do not point laser directly at eye.
Use caution around reflective surfaces.
Keep out of reach of children.
2-2 Safety symbols
Dangerous, refer to this manual before using the
meter.
CE Certification.
This instrument conforms to the following standards:
EN61326: Electrical equipment for measurement, control
and laboratory use.
IEC61000-4-2: Electrostatic discharge immunity test.
IEC61000-4-3: Radiated, radio-frequency,
electromagnetic field immunity test.
IEC61000-4-8: Power frequency magnetic field immunity
test.
Tests were conducted using a frequency range of
80-1000MHz with the instrument in three orientations.
The average error for the three orientations is ±1.0ºF
(±0.5ºC) at 3V/m throughout the spectrum. However,
between 781-1000MHz at 3V/m, the instrument may
not meet its stated accuracy.
5. Maintenance
Cleaning the lens: Blow off loose particles using clean
compressed air. Gently brush remaining debris sway
with a camel's hair brush. Carefully wipe the surface
with a moist cotton swab. The swab may be moistened
with water.
IRT-206 Gun-style Infrared Thermometer
©2008 GENERAL TOOLS & INSTRUMENTS
3. Specifications
Temperature Range -4º to 605ºF (-20º to 320ºC)
Accuracy ±2% of reading or ±2ºC
whichever is greater
Thermopile 5~14 µm
Repeatability ±1ºC (±2ºF)
Response Time 500 ms.
Operation Temp. 32º to 122ºF (0º to 50ºC), 10~90% RH
Auto Power Off Automatically after approx. 6 sec.
Emissivity Fixed at 0.95
Storage Temp. 14º to 140ºF (-10º to 60ºC)
ºF/ºC Switchable YES
Backlight YES
Laser Sight Switchable YES
Battery Type "9V" battery
Battery Life 16 hrs
Dimension 5.9" x 3.8" x 1.3" (150 x 133 x 45 mm)
Weight 6oz. (135g) Approx.
Accessory "9V" battery, Instruction manual
4. Operation of Instrument
4-1 Quick Start
To measure a temperature, point the unit at the target
you want to measure, pull the trigger and hold. Be sure
to consider the target area inside the angle of vision of
this instrument. The single spot of laser is used for
aiming only.
The unit is powered by "9V" battery and displays
temperatures in either ºF or ºC.
Replace the battery when the battery voltage drops
below the voltage for reliable operation and the low
battery symbol
Battery Low
Laser ON/OFF Indication
Temperature Display
ºC/ºF Switch
NOTE:
DO NOT use solvents to clean the glass lens.
Cleaning the housing:
Use soap and water on a damp sponge or soft cloth.
™ New York, NY 10013
Montreal, Canada H9R 1E1
appears.
SCAN / HOLD
ºC/ºF Switch Indication
Laser ON/OFF Switch