Pioneer ELITE SC-LX501 Manuel De Base page 5

> Before start > Hookup
1 6
(  P3)
9 :
Height Speakers
Choose one of the following:
$
Front High Speakers
$
Rear High Speakers
> Setup > Playback
3´ (0.9 m)
or more
> Part Names
For 7.1-Channel System
(with Height Speaker-A)
Front High or Rear High speakers
This is a basic 5.1-channel system with the addition of height speakers, either
as front high speakers or rear high speakers. Select which speakers to setup
according to the environment of the room. You can select the Dolby Atmos
listening mode (5.1.2 channel playback), which realizes the most up-to-date
3D surround sound including overhead sounds, when the input format is Dolby
Atmos. With formats other than Dolby Atmos, you can still create a sound field
by outputting sound from the height speakers when you select the Dolby
Surround listening mode. Front high speakers or rear high speakers should be
situated at least 0.9 m higher than the front speakers. Front high speakers
should be situated directly above the front speakers and the distance between
the rear high speakers should match the distance between the front speakers.
Both should be set up facing the listening position.
Go To "Hookup" ( P10)

＊1
＊ 1: 22e to 30e, ＊ 2: 120e
＊2
5
En