Instructions For Installation - Sentiotec 63927 Notice De Montage

2. Instructions for installation

CAUTION: all packaging components must be removed before commissioning
The infrared radiator is also suitable for installation on the cabin ceiling. Ensure that the reverse of the
radiator is not covered and that the generated heat can escape!
If the infrared radiator is installed in the back region, a suitable protective measure must be implemented to
ensure that the protective grille or front glass panel cannot be inadvertently depressed.
Ensure compliance with minimum distances.
The glass plate of the radiator can become very hot. Ensure by means of a suitable protective measure that
adequate contact protection exists.
Install vertically in such a way that the connection box faces upwards!
A stainless steel screen is optionally available
VIT-BL-L Stainless steel screen for 500W IR radiator
VIT-BL-S Stainless steel screen for 350W IR radiator
A minimum distance of 150 mm must be complied with between the radiators
If the radiator is installed in the ceiling, there must be at least 150mm of free and well-ventilated space
behind the radiator
The minimum distance between two radiators situated opposite one another must be at least 900mm.
If a radiator is installed in the field of vision of the user, a minimum distance of 600mm must be complied
with between the face of the user and the radiator.
WE DO IT FIRST.
Instructions for installation and use – only for experts P. 4/10