Technical Specifications - Inventum AC125W Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The appliance has an unpleasant
smell during use
The appliance does not switch on for
a period of 3 minutes after it has been
switched on.
Display code
9

technical specifications

Type number
Voltage
Connected load
Cooling capacity*
EE Class*
EER*
Power consumption kW
Power consumption Standby W
Current consumption nom. A
Air displacement max. m
3
Dehumidification max. ** L/24h
Suitable for m
3
Refrigerant / GWP type/gr
Thermostat range °C
Fan speeds
Max. noise level dB(A)
Dimensions (hxwxd)
Nett weight
Protection class
Remote control
• The air filter is dirty/blocked
• The internal safety system of the
compressor prevents the appliance
from being switched on until
3 minutes have passed since
it was switched off.
• Low temperature - freeze protection
• Probe error - sensor defective
• Full water reservoir
/h
• Clean the air filter as prescribed
• This delay is normal and the
appliance will function normally
after the 3 minutes have passed
• The appliance is provided with
a freeze protection to prevent
the formation of excess ice.
The appliance automatically restarts
once the thawing process has been
completed.
• If this code is shown on the display,
please contact customer service.
• Empty the internal water reservoir.
In accordance with instructions
in section 6 - discharging
condensation water
AC125W
220-240Volt ~50Hz
1350 Watt
12000Btu/h (3.2 kW)
A
2.6
1.00
0.5
2.6 kW
300
36
105
R-290 / 3 /235 g.
18 - 32
3
65 dB(A)
715 x 445 x 370 mm
31 kg
IPX0
yes
31
English

Publicité

Table des Matières
loading

Table des Matières