Install hubcap.
Press the hub cap
fi rmly into place. It
should seat fl ush
to the rim.
For either mounting option locate the T-Bolt
entry point on the center rail of your trailer.
A
There is an entry point on both the top and
bottom sides of the center rail.
1033551B-3/6
OPTIONAL SPARE TIRE PLACEMENT
Your tires should be infl ated to 32-40 psi cold (see tire sidewall ratings).
Test with a tire gauge and periodically check for your safety.
Note: To remove the hubcap
use a fl athead screwdriver to
gently pry it from the rim.
Insert the two T-Bolts through the entry point, and
B
then proceed with steps 3 through 5 to secure the
mounting bracket, and install you spare tire.