BPW ECO Plus Instructions De Service Et De Montage page 17

04.001.21.24.0 V4 02.04.2014 17
Digital ECOMETER · Operating and Installation Instructions
4. After setting the tyre rolling circumference (--> page 14), apply a thin coat of BPW special long-
Plus
life grease ECO-Li to the ECOMETER in the area of the connection thread.
5. Screw the ECOMETER onto the wheel hub.
Important!
The ECOMETER is only allowed to be screwed on and off using
torque-limited drivers (no impact drivers!) or manually with a
torque wrench.
Tightening torque: 800 Nm
Caution! Do not bend the magnet with the spring during installation and removal.