Replacement Battery - Tripp-Lite SMX Serie Guide De L'utilisateur

Important Safety Instructions
Equipment Connection Warnings
• Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of
a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support
device.
• Do not connect surge suppressors or extension cords to the output of your UPS. This might
overload the UPS and will void the surge suppressor and UPS warranties.
CAUTION: The unit is for exclusive interconnection with IEC 60601-1 certified
equipment in the patient environment and IEC 60950-1 certified equipment outside
of the patient environment. Do not contact SIP/SOP (such as the USB port, RS232
port, etc.) and the patient at the same time.
Battery Warnings
• Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe
proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries.
Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before
performing battery replacement. Battery replacement should be performed only by authorized
service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries
are recyclable. Refer to your local codes for disposal requirements. Tripp Lite offers a complete
line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at
www.tripplite.com to locate the specific replacement battery for your UPS.
• During hot-swap battery replacement, the UPS will not provide backup power in the event of a
blackout or other power interruptions.
• Do not operate UPS without batteries.
• If your UPS is equipped with an external battery connector, only connect Tripp Lite external battery
packs of the appropriate voltage.
• If your UPS is not equipped with an external battery connector, do not attempt to add external
batteries.

Replacement Battery

MODEL
OMNIX350HG (AGOM6832)
SMX700HG (AGSM6833)
SMX1200XLHG (AGSM6834)
Maintenance:
• Other than battery replacement, the UPS does not require maintenance. There are no user
serviceable parts inside. Battery replacement should only be performed by qualified service
personnel.
Cleaning/Disinfecting:
• Before cleaning or disinfecting, the UPS should be turned off and unplugged.
• For cleaning the UPS, only a damp cloth should be used.
• For disinfecting the USP , a damp cloth wetted with isopropyl alcohol may be used. No other
cleaning agent should be used.
15-08-266-9333A2.indb 4
BATTERY NOMINAL VOLTAGE
AND QUANTITY OF BATTERY STRING
LEAD-ACID 12V, 12AH
6V, 2 PCS
LEAD-ACID 36V, 9AH
12V, 3 PCS
LEAD-ACID 36V, 9AH
12V, 3 PCS
4
continued
BATTERY PACK NO.
RBC52
RBC53
RBC53
9/9/2015 2:00:16 PM