Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW351 Mode D'emploi

Package contents

The package contains:
1 Circular Saw with 1 general purpose TCT blade
1 Parallel fence
1 Saw blade wrench
1 Allen key
1 Dust extraction adapter
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your D WALT DW351 Circular Saw is a versatile
E
Power Tool designed for professional sawing of
wood, wood products and plastics.
1 ON/OFF-switch
2 Lock-off button
3 Star knob for depth of cut
4 Motor cover
5 Guide knob
6 Parallel fence
7 Blade guard
8 Blade bolt
9 Riving knife
10 Saw shoe
11 Dust extraction outlet
12 Bevel scale
13 Star knob for bevel locking system
14 Star knob for parallel fence
15 Outer arbour collar
16 Screw
17 Ventilation slots

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 50144; therefore no
earth wire is required.
17
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N)
wires to the earth pin marked E or
For 115 V units with a power rating exceeding
1500 W, we recommend to fit a plug to BS4343
standard.
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data). The minimum conductor
2
size is 1.5 mm . When using a cable reel, always
unwind the cable completely.
Also refer to the table on the next page.
E N G L I S H
.
en - 4