Heatsail BEEM 230 Manuel De L'utilisateur page 40

EN
S T E P 1 0
Slide the cover upwards and fix
it into place on the bracket with
supplied screws.
Go to step 17.
S T E P 1 1
Drill the holes where the brackets
has to be mounted. Make sure
the BEEM hangs stable.
2 universal anchors are included.
(bore diameter 8 mm)
NOTE: We have provided anchors
and screws. If the supplied
hardware is not suitable for your
surface, please contact your local
hardware supplier.
S T E P 1 2
Install the anchors and mount
the bracket to the ceiling.
Mount with the supplied screws.
40 Heatsail BEEM®